Reduced price! ROCKY AS37 CARBON 29ER / DT Swiss 350 SP Carbon ENDURO wheelset 1.663g

ROCKY AS37 CARBON 29ER / DT Swiss 350 SP Carbon ENDURO wheelset 1.663g

Rocky

New

Indestructible ENDURO wheels that can prove their quality on the most difficult trails. With an XC weight they can face even the longest climbs with no worries.
Thanks to the DT Swiss Star Ratchet system, the 350 hubs are also ideal for the high torques generated by modern E-BIKES.


Rims: ROCKY AS37 ENDURO CARBON 29er, inner width 30.6mm, asymmetric, hookless, 490g
Hubs DT SWISS 350 SP: 145g + 252g
Spokes: Alpina Blade SuperLite
Nipples: Pillar DSN ergal colour of your choice
Number of spokes: 28/28

Wheelset weight: 1.663g

More details



In stock

  • Shimano/Sram 10/11s
  • Alpina Blade SuperLite
  • QR9 (quick release)
  • QR15 (through axle 15x100mm)
  • QR-135mm (quick release)
  • X12x142mm (through axle 12mm)
  • NO
  • Yes black valves

€ 777,87

€ 1.057,38

-26.4341%

Product Options
COMPATIBILITY
 
Shimano/Sram 10/11s
 
 
Sram XD (XX1)
 
 
Shimano Micro Spline 12s
 
SPOKES TYPE
 
Alpina Blade SuperLite
 
FRONT HUB STANDARD
 
QR9 (quick release)
 
 
QR15 (through axle 15x100mm)
 
 
Boost 15/110mm
 
REAR HUB STANDARD
 
QR-135mm (quick release)
 
 
X12x142mm (through axle 12mm)
 
 
Boost 12x148mm
 
HUBS COLOUR
 
 
Black
 
NIPPLES COLOUR
 
 
Black
 
 
 
Blue
 
 
 
Red
 
 
 
Gold
 
 
 
Acid green
 
 
 
Orange
 
 
 
Silver
 
DECALS COLOUR
 
 
White
 
 
 
Black
 
 
 
Red
 
 
 
Green
 
 
 
Blue
 
 
 
Yellow
 
 
 
Orange
 
 
 
Gold
 
KIT TUBELESS TAPE / VT1 SL VALVES
 
NO
 
 
Yes black valves (Free of charge for bank transfer)
 
 
Yes red valves (Free of charge for bank transfer)
 
 
Yes black valves
[Add € 21,17]
 
Yes red Valves
[Add € 21,17]
  
  Quantity:

Rim features:
ROCKY CARBON AS37 ENDURO
T700 carbon fibre with UD Matt finish
Low profile design for the better impact distribution
Thick 3.2mm hookless side wall design for better impact resistance
Asymmetric design that remarkably reduces the tension differences between the wheel's right and left side spokes, with great increase in stability and lateral stiffness.
Tubeless ready
Height: 24.5mm
Width: 37mm
Internal width: 30.6mm
Weight: 490g

Crash Replacement ROCKY / ROCKYROAD

Hubs features:
DT SWISS 350 SP (Straight Pull)
Difficult internal structure and sophisitcated milling-jobs on the outside structure were necessary to finalize these hubs. The hub-body is oversized and at the same time very light. The spoke holes are drilled with 3D angles in order to give the spokes a direction for 3.5 X lacing. We offer various conversion-kits to make the hubs compatible to fit to all major standards.
The hub body is made from forged 7075 T6 material - just a few manufacturers forge the hubshells with this material in order to get the maximum strengh out of the hubshell.
All other hub parts, such as the axles, the freewheel body and the sidecaps are made from 7075 T6 material as well.
The front and the rear axle have a diameter of 17mm at the bearing seats. Weight reductions were realized by removing axle material on the outside structure where it is not needed.
Another feature of our hubs are the anodized axles, which prevent from oxidation and corrosion.
The freewheelbody has 3 pawls, the gear-ring has 24 teeth. This configuration ensures a hub drive system which lasts. 24 engagements is a reliable choice which will still work after a certain usage, even the teeth and the gear-ring show a little bit wear. Other manufacturers strive for excessive engagement points. Due to the micro structure of the gear-ring and pawls, these systems tend to wear out quite fast and fail to work even just a little bit of water gets into the hub.
Front available in QR9 quick release, QR15 through axle versions, Boost 15x110mm
Rear available in QR-135mm quick release, X12-142mm or Boost 12x148mm through axe versions
Made in ergal 7075
Internationl Standard 6 holes rotor fixing
Weight: 145g + 252g

Spokes features:
ALPINA BLADE SUPERLITE
Made in Italy by Alpina
Made with AISI 302 stainless steel through cold forging process.
Section: 2.0-0.9/2.2-2.0mm (bladed section is 0.9 x 2.2mm)

Every wheelset is supplied with 3 spare spokes/nipples
Nipples: Pillar DSN ergal colour of your choice
Not supplied with quick releases

Our wheels are built by hand in house by highly specialized personnel.
The Bikeonline staff uses the best professional tools on the market into each step of the wheelbuilding process. The P&K Lie truing stand is one example, it allows us to check perfect truing through precise decimal comparators (0.1 millimeters accuracy).
We build most of the tools we use, to fit the level of our builds, which require a high accuracy.
The use of different tensiometers as Park Tool, Pillar and DT Swiss allows us to reach the correct tensions of every spokes.
Each wheel is pre-stressed by hand to ensure that nothing has been settling during the early stages of use and that the spoke tension remains constant for a long time even under very high loads.

RIM HEIGHT24.5mm
WHEELS TYPEEnduro / DH
WHEELSET WEIGHT1.60 kg - 1.70 kg
EXTERNAL RIM WIDTH37mm
INTERNAL WIDTH30.6mm
RIMS BRANDRocky
HUBS BRANDDT SWISS
WHEEL SIZE29"
RIM MATERIALCarbon
RIM TYPETubeless ready

ENDURO / DH

Check also

Special offers (+)


  • Sprayke - LATEX 1 Sealant for tubeless tires 1000ml


    € 13,52

    € 18,03

    (-25%)






  • Sram - Etap Powerpack


    € 127,05

    € 151,64

    (-16.2162%)






  • TAYA - Tolv Black chain 272g


    € 38,52

    € 63,03

    (-38.8817%)





  • See all specials ->