HSC - Ceramic Bearings Kit for Carbon Ti hubs MTB X-HUB SL and SP Lefty

HSC - Ceramic Bearings Kit for Carbon Ti hubs MTB X-HUB SL and SP Lefty

  HSC

Kit contains:
QTY. 1 Ceramic Bearing 25x37x7 mm [code 6802]
QTY. 3 Ceramic Bearing 17x26x5 mm [code 6803]
QTY. 1 Ceramic Bearing 17x30x7 mm [code 6903]
QTY. 1 Ceramic Bearing 25x37x7 mm [code 6805]

This kit includes all the rear and  Lefty front hub bearings that are covered in the cassette body:

X-Hub MTB SP
X-Hub MTB SL
Lefty

€ 133,61

Pack content

DIMENSIONS15 x 24 x 5 mm
BALL MATERIALSi3N4
BALL GRADE3 US Made Silicon Nitride ceramic
RACESCryogenically Treated Chromium Steel
SEALS"VV" Dual-lip non-contact
PRECISIONABEC 5
RETAINERSPolyamide nylon
APPLICATIONWheel Hub
WEIGHT6.7g

The HSC Ceramic  ABEC 5 bearings have ceramic balls and steel races.

Balls:
Silicon Nitride Ceramic Si3N4 balls are made from pure Silicon Nitride material with extreme high density from uniform compaction, the micro-structural development of this material during manufacturing is second to none. These high precision grade 5, Si3n4 pure ceramic balls are 5/1,000,000″ from exactly round in sphericity, 60% lighter weight, and 7 times harder than steel.
The balls are Grade 3, Silicon Nitride (Si3n4).  These are the roundest balls you can buy without a military license.

Races:
52100 High carbon Chromium Alloy Races with Cryogenic Treatment:
Cryogenic treatment takes the races down to minus three hundred degree Fahrenheit to normalize the crystalline structure of the material so the races will resist the hardness of the ceramic balls and get the maximum wear potential.
The races are treated with a black oxide coating, which helps prevent rusting in the bearing. The races are then reground to a mirror finish after this treatment. Finally, they are cryogenically treated for strength before assembly.

Seals:
We use Silicone VV seals, which is the lightest drag seal available on the market. VV Seals: two NBR 70 rubber seals with non-contact type seal, which rides in a matching groove machined into the bearing.

Data sheet

MANUFACTURESHSC
INTERNAL DIAMETER33mm
OUTER DIAMETER47mm
BALL MATERIALCeramic
CODE6802
DIMENSIONS17 x 26 x 5 mm
BALL MATERIALSi3N4
BALL GRADE3 US Made Silicon Nitride ceramic
RACESCryogenically Treated Chromium Steel
SEALS"VV" Dual-lip non-contact
PRECISIONABEC 5
RETAINERSPolyamide nylon
APPLICATIONWheel Hub
WEIGHT7.3g

The HSC Ceramic  ABEC 5 bearings have ceramic balls and steel races.

Balls:
Silicon Nitride Ceramic Si3N4 balls are made from pure Silicon Nitride material with extreme high density from uniform compaction, the micro-structural development of this material during manufacturing is second to none. These high precision grade 5, Si3n4 pure ceramic balls are 5/1,000,000″ from exactly round in sphericity, 60% lighter weight, and 7 times harder than steel.
The balls are Grade 3, Silicon Nitride (Si3n4).  These are the roundest balls you can buy without a military license.

Races:
52100 High carbon Chromium Alloy Races with Cryogenic Treatment:
Cryogenic treatment takes the races down to minus three hundred degree Fahrenheit to normalize the crystalline structure of the material so the races will resist the hardness of the ceramic balls and get the maximum wear potential.
The races are treated with a black oxide coating, which helps prevent rusting in the bearing. The races are then reground to a mirror finish after this treatment. Finally, they are cryogenically treated for strength before assembly.

Seals:
We use Silicone VV seals, which is the lightest drag seal available on the market. VV Seals: two NBR 70 rubber seals with non-contact type seal, which rides in a matching groove machined into the bearing.

Data sheet

MANUFACTURESHSC
INTERNAL DIAMETER17mm
OUTER DIAMETER26mm
BALL MATERIALCeramic
CODE6803
DIMENSIONS17 x 30 x 7 mm
BALL MATERIALSi3N4
BALL GRADE3 US Made Silicon Nitride ceramic
RACESCryogenically Treated Chromium Steel
SEALS"VV" Dual-lip non-contact
PRECISIONABEC 5
RETAINERSPolyamide nylon
APPLICATIONWheel Hub
WEIGHT14.8g

The HSC Ceramic  ABEC 5 bearings have ceramic balls and steel races.

Balls:
Silicon Nitride Ceramic Si3N4 balls are made from pure Silicon Nitride material with extreme high density from uniform compaction, the micro-structural development of this material during manufacturing is second to none. These high precision grade 5, Si3n4 pure ceramic balls are 5/1,000,000″ from exactly round in sphericity, 60% lighter weight, and 7 times harder than steel.
The balls are Grade 3, Silicon Nitride (Si3n4).  These are the roundest balls you can buy without a military license.

Races:
52100 High carbon Chromium Alloy Races with Cryogenic Treatment:
Cryogenic treatment takes the races down to minus three hundred degree Fahrenheit to normalize the crystalline structure of the material so the races will resist the hardness of the ceramic balls and get the maximum wear potential.
The races are treated with a black oxide coating, which helps prevent rusting in the bearing. The races are then reground to a mirror finish after this treatment. Finally, they are cryogenically treated for strength before assembly.

Seals:
We use Silicone VV seals, which is the lightest drag seal available on the market. VV Seals: two NBR 70 rubber seals with non-contact type seal, which rides in a matching groove machined into the bearing.

Data sheet

MANUFACTURESHSC
INTERNAL DIAMETER17mm
OUTER DIAMETER30mm
BALL MATERIALCeramic
CODE6903
DIMENSIONS25 x 37 x 7 mm
BALL MATERIALSi3N4
BALL GRADE3 US Made Silicon Nitride ceramic
RACESCryogenically Treated Chromium Steel
SEALS"VV" Dual-lip non-contact
PRECISIONABEC 5
RETAINERSPolyamide nylon
APPLICATIONWheel Hub
WEIGHT19.5g

The HSC Ceramic  ABEC 5 bearings have ceramic balls and steel races.

Balls:
Silicon Nitride Ceramic Si3N4 balls are made from pure Silicon Nitride material with extreme high density from uniform compaction, the micro-structural development of this material during manufacturing is second to none. These high precision grade 5, Si3n4 pure ceramic balls are 5/1,000,000″ from exactly round in sphericity, 60% lighter weight, and 7 times harder than steel.
The balls are Grade 3, Silicon Nitride (Si3n4).  These are the roundest balls you can buy without a military license.

Races:
52100 High carbon Chromium Alloy Races with Cryogenic Treatment:
Cryogenic treatment takes the races down to minus three hundred degree Fahrenheit to normalize the crystalline structure of the material so the races will resist the hardness of the ceramic balls and get the maximum wear potential.
The races are treated with a black oxide coating, which helps prevent rusting in the bearing. The races are then reground to a mirror finish after this treatment. Finally, they are cryogenically treated for strength before assembly.

Seals:
We use Silicone VV seals, which is the lightest drag seal available on the market. VV Seals: two NBR 70 rubber seals with non-contact type seal, which rides in a matching groove machined into the bearing.

Data sheet

MANUFACTURESHSC
INTERNAL DIAMETER25mm
OUTER DIAMETER37mm
BALL MATERIALCeramic
CODE6805

MOUNTAIN BIKE

Check also