HardWheel AS26 - AS31 T1000 GrigioCarbonio / ROCKY Boost SP carbon MTB wheelset from 1.157g

Rim features:
The super light HardWheel AS26 - AS31 T1000 rims from Grigiocarbonio have the technology.
100% made in Italy technology pushed to the highest levels. The craftsmanship of Grigiocarbonio and the experience gained with Formula 1 allow to produce extremely light but strong rims, without any weight limit for the rider.

ROCKY KOM rims are intended for XC / Marathon use.

HardWheel AS26
Finish: 12K - Shiny | 12K - Matte | UD - Shiny | UD - Matte
Hookles design
Suggested tubeless tape width: 27mm
Max pressure: 3.0 Bar
Minium use pressure: 1.4 Bar
Tubeless ready
Height: 25mm
Width: 29mm
Internal width: 26mm
Number of spokes: 24 /28
Weight: 255g front rim / 275g rear rim

HardWheel AS31
Finish: 12K - Shiny | 12K - Matte | UD - Shiny | UD - Matte
Hookles design
Suggested tubeless tape width: 26mm
Max pressure: 3.0 Bar
Minium use pressure: 1.4 Bar
Tubeless ready
Height: 25mm
Width: 34mm
Internal width: 31mm
Number of spokes: 24 /28
Weight: 280g front rim / 300g rear rim

Hub features:
ROCKY Boost SP 6-Hole
Intended use: MTB
Hub material: Ergal 7075
Engagement system: Ratchet
Point Of Engagement (P.O.E.): 36
Number of holes: 28
Brake disc mount: 6-Hole
Front hub axle type: Boost 15 x 110
Rear hub axle type:  Boost 12 x 148
Spoke type: Straightpull
Colors: Black
Weight: 144g + 217g

Spoke features:
ALPINA BLADE HYPERLITE offer a significant weight saving with no loss of resistance, stiffness of the wheel and durability of the spokes
Section: 2.0-0.9/1.6-2.0mm (bladed section is 0.9 x 1.6mm)
Black colour

Every wheelset is supplied with 3 spare spokes/nipples
Nipples: DSN ergal colour of your choice
Not supplied with quick releases

Our wheels are built by hand in house by highly specialized personnel.
The Bikeonline staff uses the best professional tools on the market into each step of the wheelbuilding process. The P&K Lie truing stand is one example, it allows us to check perfect truing through precise decimal comparators (0.1 millimeters accuracy).
We build most of the tools we use, to fit the level of our builds, which require a high accuracy.
The use of different tensiometers as Park Tool, Pillar and DT Swiss allows us to reach the correct tensions of every spokes.
Each wheel is pre-stressed by hand to ensure that nothing has been settling during the early stages of use and that the spoke tension remains constant for a long time even under very high loads.

This product is to be considered produced on request / on order, due to the high customization needed. It is therefore not possible to use the right of withdrawal or the cancellation of an order already confirmed.
See "Terms and conditions of use". Advance payment is required on this product.