Your cart
There are no more items in your cart
Rim features:
ROCKYROAD KOM 36C DISC Clincher Tubeless Ready
UD carbon, matt finish with shiny decal
Height: 36mm
Width: 28mm
Inner width: 22.6mm
Weight: 345g
Crash Replacement ROCKY / ROCKYROAD
The special layering of T700 and T800 carbon fibre sheets gives ROCKYROAD rims a high lateral stiffness, while ensuring a high shock and vibration dampening capacity, combined with extremely low weights.
ROCKYROAD KOM 36C rims are paintless. They come out of the mold as a finished product. Compared with the traditional process, there is no need to polish, so the original epoxy resin layer is retained on the surface, so they have a very strong scratch resistance.
Paintless process doesn't need any post-production like painting, water sanding, etc. So it's even more environmental friendly than traditionally made rims. No wastewater emission during the whole process.
Width an inner width of 22.6mm ROCKYROAD 36C rims are
ROCKYROAD rims must pass the stringent tests EN 14766 and ED 14781. These tests have been designed to ensure the strength and durability of individual parts as well as of the bicycle as a whole, demanding high quality throughout and consideration of safety aspects from the design stage onwards.
ROCKYROAD rims are intended for Road, Cyclocross or Gravel use
Hub features:
DT SWISS 240 EXP SP (Straight Pull) Center Lock
Difficult internal structure and sophisitcated milling-jobs on the outside structure were necessary to finalize these hubs. The hub-body is oversized and at the same time very light. The spoke holes are drilled with 3D angles in order to give the spokes a direction for 3.5 X lacing. We offer various conversion-kits to make the hubs compatible to fit to all major standards.
The hub body is made from forged 7075 T6 material - just a few manufacturers forge the hubshells with this material in order to get the maximum strengh out of the hubshell.
All other hub parts, such as the axles, the freewheel body and the sidecaps are made from 7075 T6 material as well.
The front and the rear axle have a diameter of 17mm at the bearing seats. Weight reductions were realized by removing axle material on the outside structure where it is not needed.
Another feature of our hubs are the anodized axles, which prevent from oxidation and corrosion.
Star Ratchet EXP freewheel body with 26 teeth
Made in ergal 7075
Center Lock rotor fixing
Weight: 104g + 191g
Spoke features:
ALPINA BLADE HYPERLITE offer a significant weight saving with no loss of resistance, stiffness of the wheel and durability of the spokes
Section: 2.0-0.9/1.6-2.0mm (bladed section is 0.9 x 1.6mm)
Black colour
Every wheelset is supplied with 3 spare spokes/nipples
Nipples: DSN ergal acid green, black, blue, gold, green, orange, red or silver
Not supplied with quick releases
Our wheels are built by hand in house by highly specialized personnel.
The Bikeonline staff uses the best professional tools on the market into each step of the wheelbuilding process. The P&K Lie truing stand is one example, it allows us to check perfect truing through precise decimal comparators (0.1 millimeters accuracy).
We build most of the tools we use, to fit the level of our builds, which require a high accuracy.
The use of different tensiometers as Park Tool, Pillar and DT Swiss allows us to reach the correct tensions of every spokes.
Each wheel is pre-stressed by hand to ensure that nothing has been settling during the early stages of use and that the spoke tension remains constant for a long time even under very high loads.
This product is to be considered produced on request / on order, due to the high customization needed. It is therefore not possible to use the right of withdrawal or the cancellation of an order already confirmed.
See "Terms and conditions of use". Advance payment is required on this product.
