• -13.97%
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g
DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g

DUKE Lucky Jack SLS ULTRA CARBON 29ER / Yuniper R3CØRD SP carbon MTB wheelset from 1.121g

Rims: DUKE Lucky Jack SLS ULTRA CARBON 29er, inner width 24.5mm, outer width 30mm, asymmetric, hookless, 275g
Hubs YUNIPER R3CØRD SP: 102g (116g Lefty 2.0) + 208g
Spokes: Alpina Blade SuperLite or Blade HyperLite
Nipples: Pillar DSN ergal
Number of spokes: 28/28

Maximum bike system weight: 95kg (rider, bike, clothing and backpack / bags)

Wheelset weight:
- 1.121g (Blade HL spokes)
- 1.181g (Blade SL spokes)

REAR WHEEL DISH
  • Standard
HUB COLOUR
  • Black
NIPPLE COLOUR
  • Black
COMPATIBILITY
  • Shimano/Sram MTB 10/11s
TUBELESS VALVES / TAPE (FITTED)
  • NO
SPOKE TYPE
  • Alpina Blade SuperLite
FRONT HUB STANDARD
  • Boost 15x110mm
REAR HUB STANDARD
  • 12x142mm (12mm thru axle)
AVAILABLE IN 15/20 DAYS
€1,105.74 €1,285.25 -13.97%

Product Options
REAR WHEEL DISH
 
Cannondale AI
 
Standard
HUB COLOUR
 
 
Black
NIPPLE COLOUR
 
 
Blue
 
 
Black
 
 
Gold
 
 
Red
 
 
Green
 
 
Acid Green
COMPATIBILITY
 
Shimano Micro Spline 12s
 
Shimano/Sram MTB 10/11s
 
Sram XD 11/12s
TUBELESS VALVES / TAPE (FITTED)
 
NO
 
YES Black Valves
[Add €18.10]
 
YES Black Valves (Free for bank transfer payment)
 
YES Red Valves
[Add €18.10]
 
YES Rec Valves (Free for bank transfer payment)
SPOKE TYPE
 
Alpina Blade HyperLite
[Add €66.69]
 
Alpina Blade SuperLite
FRONT HUB STANDARD
 
Boost 15x110mm
 
Lefty 2.0 / Ocho
 
QR15 (15x100mm thru axle)
REAR HUB STANDARD
 
12x142mm (12mm thru axle)
 
Boost 12x148mm
 
QR-135mm (quick release)
  
  Quantity:

Description

Rim features:
DUKE Lucky Jack SLS ULTRA CARBON
Carbon UD satin finish
Asymmetric design that remarkably reduces the tension differences between the wheel's right and left side spokes, with great increase in stability and lateral stiffness.
Tubeless ready
Height: 18.5mm
Width: 30mm
Internal width: 24.5mm
Weight: 275g

Hub features:
YUNIPER R3CØRD SP (Straight Pull)
Difficult internal structure and sophisitcated milling-jobs on the outside structure were necessary to finalize these hubs. The hub-body is oversized and at the same time very light. The spoke holes are drilled with 3D angles in order to give the spokes a direction for 3.5 X lacing. We offer various conversion-kits to make the hubs compatible to fit to all major standards.
The hub body is made from forged 7075 T6 material - just a few manufacturers forge the hubshells with this material in order to get the maximum strengh out of the hubshell.
All other hub parts, such as the axles, the freewheel body and the sidecaps are made from 7075 T6 material as well.
The front and the rear axle have a diameter of 17mm at the bearing seats. Weight reductions were realized by removing axle material on the outside structure where it is not needed.
Another feature of our hubs are the anodized axles, which prevent from oxidation and corrosion.
The freewheelbody has 3 pawls, the gear-ring has 24 teeth. This configuration ensures a hub drive system which lasts. 24 engagements is a reliable choice which will still work after a certain usage, even the teeth and the gear-ring show a little bit wear. Other manufacturers strive for excessive engagement points. Due to the micro structure of the gear-ring and pawls, these systems tend to wear out quite fast and fail to work even just a little bit of water gets into the hub.
R3CØRD Front radial side radial rays available in QR9 quick release, QR15 through axle versions, Boost 15x110mm, Lefty 2.0/SuperMax (crossed beams on both sides)
Rear available in QR-135mm quick release, X12-142mm or Boost 12x148mm through axe versions
Made in ergal 7075
Internationl Standard 6 holes rotor fixing
Nitro sealed bearings: 2 front, 4 rear
The black surface treatment on the Yuniper NITRO-bearings makes them less prone to rust. Improved seales reduce the probability of water and humidity getting into the bearing.
Furthermore, we used a high end grease which protects the inner structure of the bearing and assures a very good lubrication. Internal clearances and accuracy classes are no foreign words to us.
Ergal cassette body, with 3 pawls with engagement
Colour: black
Weight: 102g (116g Lefty 2.0) + 208g

Spoke features:
ALPINA BLADE SUPERLITE
Made in Italy by Alpina
Made with AISI 302 stainless steel through cold forging process.
Section: 2.0-0.9/2.2-2.0mm (bladed section is 0.9 x 2.2mm)
ALPINA BLADE HYPERLITE
offer a significant weight saving with no loss of resistance, stiffness of the wheel and durability of the spokes
Section: 2.0-0.9/1.6-2.0mm (bladed section is 0.9 x 1.6mm)
Black colour

Every wheelset is supplied with 3 spare spokes/nipples

Nipples: Pillar DSN ergal acid green, black, blue, gold, green or red
Not supplied with quick releases

Our wheels are built by hand in house by highly specialized personnel.
The Bikeonline staff uses the best professional tools on the market into each step of the wheelbuilding process. The P&K Lie truing stand is one example, it allows us to check perfect truing through precise decimal comparators (0.1 millimeters accuracy).
We build most of the tools we use, to fit the level of our builds, which require a high accuracy.
The use of different tensiometers as Park Tool, Pillar and DT Swiss allows us to reach the correct tensions of every spokes.
Each wheel is pre-stressed by hand to ensure that nothing has been settling during the early stages of use and that the spoke tension remains constant for a long time even under very high loads

This product is to be considered produced on request / on order, due to the high customization needed. It is therefore not possible to use the right of withdrawal or the cancellation of an order already confirmed.
See "Terms and conditions of use". Advance payment is required on this product.

Product Details

RIM HEIGHT
18.5mm
RIM DIAMETER
29"
INTERNAL WIDTH
24.5mm
WIDTH
30mm
RIM MATERIAL
Carbon
SPOKES MODEL
Alpina steel
WEIGHT PAIR
1.10 kg - 1.20 kg
RIM MANUFACTURE
Duke
HUB MANUFACTURE
Yuniper
RIM TYPE
Tubeless Ready
TYPE OF WHEELS
XC / Marathon
ROCWHE2205111
2000000000000

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.